Publicité
All manuals and user guides at all-guides.com
When the instrument completes the exploration, a new channel plan is generated
based on the active channel plan. This new channel plan contains only the channels that
have been identified and the rest are removed. The equipment offers the possibility of
saving in memory the channel plan generated to use later. If the new channel plan is not
saved it will remain active until the instrument is powered off or some other plan is
loaded.
:
NOTE
In the case that is desired to explore or identify
necessary to select previously
by means of
5.13 Measurements configuration
With the aim of taking the measurements of all types of signals some times could
be necessary that user enters parameters relative to particular characteristics of these
signals, whether an automatic detection has not been possible, or these parameters
differ from the standard corresponding ones.
Page 42
USER'S MANUAL.
Figure 18.-
Spectrum exploration screen.
DVB-C
PREFERENCES
[22]
TV EXPLORER HD / HD
DVB-C
signals will be
standard as digital signal
menu.
LE
identifier
10/2012
Publicité
