Publicité
All manuals and user guides at all-guides.com
ECHOES
With the
the transmitter or the object that has caused the echo. Thus, the installer can minimise
the effects of echoes on the facility. Knowing echoes, the installer is able to reposition
the antenna and therefore, reduce the effect of echoes received.
This feature is only available for DVB-T / H signals. Therefore, you should
TV EXPLORER
configure the
ECHOES
function will not appear on the menu "Utilities".
The steps to go through to set up the digital terrestrial reception are the next:
1. Press the key
terrestrial frequency band.
2. Press the key
measurement mode for Digital TV.
3. Check the led indicator "D" and the led indicator "T" are lighted.
4. Enter parameters manually to lock signal or press
Identification) for an automatic identification of the signal (Figure 53.-).
Figure 53.-
ECHOES
Now, the
ECHOES
the
function are the next:
1. Press (short pulsation) the key
Utilities.
Page 80
USER'S MANUAL.
function is possible to know the distance from where we are to
HD
/
HD
in order to receive this type of signals. If not, the
LE
[14] (Satellite / Terrestrial Band) to select the TV
[17] (Measurement Configuration) to select the
Automatic identification of the signal.
function is available. The steps to go through in order to select
TV EXPLORER HD / HD
[25] (Automatic
[22] (Utilities) to access the menu
LE
10/2012
Publicité
