Publicité
06
EN
Before You Start
● Read through each step carefully and follow the proper
order
● Separate and count all your parts and hardware
● Give yourself enough room for the assembly process
● Have the following tools: Flat Head Screwdriver, #2
Phillips Head Screwdriver and Hammer
● Caution: If using a power drill or power screwdriver for
screwing, please pay attention to slow down and stop
when screw is tight. Failure to do so may result in stripping
the screw. (Assembly speed can be increased by using
electric screwdriver)
Helpful Hints
Helpful Hints
PEOPLE NEEDED FOR ASSEMBLY:1-2
● Open your item in the area you plan to keep it to avoid
excessive heavy lifting.
● Identify, sort and count the parts before attempting
assembly.
● Compression dowels are lightly tapped in with a hammer.
● Slides are labeled with an R (right) and L (left) for proper
placement.
● Make sure to always face the point on the top of the Cam
Lock towards the outer edge.
● If there is a back panel in the package, please install it to
make sure your unit is complete and sturdy.
● Please fix all the screws provided for the back panel which
can enhance product stability. If it is difficult to fix it when
tightening, it can be fixed with the help of a hammer and then
tightened.
● Do NOT use harsh chemicals or abrasive cleaners on this
item.
● Never push, pull, or drag your furniture.
.\Ameriwood Home Manual Template\Ameriwood Home Manual Template 3-04.bmp
07
Publicité
