STOK SGA7040 Manuel D'utilisation page 9

STEP 10: REMOVE GRATES AND HEAT TENTS
See Figure 13.
 Remove the grates, grate inserts, and warming rack. Refer
to the grill operator's manual.
 Lift the heat tents out of the grill to reveal the burners
below.
Fig. 13
STEP 11: REMOVE THE PROPANE MANIFOLD
AND VALVE ASSEMBLY
See Figure 14.
 Remove propane manifold and valve assembly from the
burners.
 Pull the propane manifold and valve assembly up and
away from the grill.
Fig. 14
ASSEMBLY
WARMING
RACK
GRATE
INSERTS
GRATES
HEAT TENTS
BURNERS
PROPANE MANIFOLD
AND VALVE ASSEMBLY
STEP 12: DISCONNECT THE PROPANE
BURNERS
See Figures 15 and 16.
 Remove the cotter pins securing the propane burners
and carryover tubes in place.
 Disconnect the propane burners by lifting them up and
toward the back of the firebox.
 Remove the carryover tubes and keep for reassembly.
 Unscrew and remove the electrode assemblies from the
propane burners.
BURNERS
Fig. 15
ELECTRODE
ASSEMBLY
Fig. 16
9 - English
COTTER
PINS
CARRYOVER
TUBE
SCREW
BURNER
CARRYOVER
TUBE