Troubleshooting - STOK SGA7040 Manuel D'utilisation

Trousse de conversion au gaz naturel
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PROBLEM
Smell of gas
Flame flashback beneath
control panel
Gas leak detected from natural
gas hose or other connection
Grease fire or continuous
e x c e s s i v e f l a m e s a b o v e
cooking surface
Burners will not light
Decreasing heat or popping
sound
Hot spots on cooking surface
Yellow flame

TROUBLESHOOTING

CAUSE
Hose or valve leaking.
Fire in burner tube due to
blockage.
Improper installation and loose
connections.
Grease build up in burner area.
Trying to light wrong burner.
Burner not connected to control
knob.
Venturi blocked.
Ignitor wire(s) are loose, dirty, or
not connected.
Dead battery in ignitor.
Venturi blocked.
Venturi blocked.
Venturi or burners may be
blocked.
17 - English
SOLUTION
Check for damaged hose or valve. Perform leak
test, see Testing Valves and Hose for Leaks in
the Assembly section.
See Cleaning Burner Assembly and Checking
Venturi for Insects in the Maintenance section.
Tighten fittings and see Testing Valves and Hose
for Leaks in the Assembly section.
Turn off control knobs. Leave hood open allowing
flames to extinguish. Once cool, clean grill
thoroughly.
See Igniting the Main Burner in the Operation
section.
Make sure valves are inside the burner tubes.
See Cleaning Burner Assembly and Checking
Venturi for Insects in the Maintenance section
Reconnect burner electrode wires or replace the
ignitor wire assembly. Clean wires and/or electrode
with rubbing alcohol and a clean swab. Tighten all
connections.
Replace the battery in the ignitor.
See Cleaning Burner Assembly and Checking
Venturi for Insects in the Maintenance section
See Cleaning Burner Assembly and Checking
Venturi for Insects in the Maintenance section
See Cleaning Burner Assembly and Checking
Venturi for Insects in the Maintenance section

Publicité

Chapitres

Table des Matières
loading

Table des Matières