STOK SGA7040 Manuel D'utilisation page 7

STEP 3: REMOVE THE PROPANE GAS
CYLINDER
See Figure 5.
 Turn the cylinder retention bolt counter-clockwise until
the cylinder is loose.
 With knees bent and in proper lifting position, carefully
lift the propane gas cylinder up and away from the grill.
NOTE: Do not store gas cylinders not connected for use
in the vicinity of the grill or any other appliance.
Fig. 5
STEP 4: DISCONNECT THE REGULATOR HOSE
See Figure 6.
 Using a wrench (not provided), unscrew the collar of
the regulator hose from the propane manifold and valve
assembly located behind the control panel.
Fig. 6
ASSEMBLY
REGULATOR
HOSE
7 - English
STEP 5: REMOVE THE CONTROL KNOBS
See Figure 7.
 Grasp a control knob and pull firmly to remove.
 Remove remaining control knobs.
Fig. 7
STEP 6: REMOVE THE CONTROL KNOB BEZEL
See Figure 8.
 Loosen the two black screws securing the control knob
bezel.
 Remove the control knob bezel.
 Repeat steps to remove remaining control knob bezels.
CONTROL
KNOB BEZEL
BLACK
SCREW
PHILLIPS
SCREW
DRIVER
Fig. 8
CONTROL
KNOB