Publicité
Maintenance / changing rechargeable batteries
To ensure good solar cell
and care").
Change the rechargeable batteries according to the instruction in Fig. B and C.
Slide the switch
Carefully press the clips on the battery compartment cover together and lift the battery compart-
ment cover.
Remove the rechargeable batteries from the battery compartment
able batteries with the same technical data. Be sure to insert the rechargeable batteries in the
correct direction. The correct polarity is shown inside the battery compartment.
Winter-time use
The low amount of sunlight may reduce the light on time at night depending on the on-time. Due to
the low position of the sun please also verify the solar cell
winter and remove ice and snow as necessary.
If the light on time is inadequate due to the weather, recharge or replace the rechargeable batteries
(see "Charging the rechargeable batteries" or "Maintenance / changing rechargeable batteries").
Cleaning and care
Switch off the product before cleaning.
Use a slightly dampened, lint-free cloth and mild cleaning agent to clean.
Regular check the motion sensor
Regularly clean the motion sensor and solar cell to ensure proper functionality.
Especially keep the solar cell free of snow and ice in winter.
Troubleshooting
= Problem
= Cause
= Solution
Product doesn't come on.
Switch
set to "OFF" position.
12
Set switch to "ECO" / "PIR" position.
Dirty motion sensor
Clean motion sensor
Rechargeable batteries are drained.
Charge rechargeable batteries (see "Charging the rechargeable batteries").
Product is flickering.
Rechargeable batteries are almost drained.
Charge rechargeable batteries (see "Charging the rechargeable batteries").
10
GB/IE/NI
batteries fully charged the charge on this setting will provide light for a total of
approx. 2 hours.
performance the solar cell must be cleaned regularly (see "Cleaning
1
to the "OFF" position.
12
and solar cell
7
.
7
.
7
and replace with new recharge-
10
is out of shade throughout the day in
1
particularly for dirt.
1
Publicité
