Télécharger Imprimer la page

Canon ELPH LT IXUS M-1 Manuel D'utilisation page 19

Publicité

Les langues disponibles

Les langues disponibles

Checking the Battery Power
Check that Em is displayed on the LCD panel
when the power is turned on.
Shooting capacity with a new battery — Approx. 22
film cartridges of 25 exposures, at normal
temperatures with 50% flash use. (Data based on
Canon's Standard Test Method.)
Battery Check Indicator
=
(Lit):
Battery is full
ES
(Li:
Have a new battery ready
E
(Blinks): Replace the battery (> 15)
im battery (CR2).
fl + Before shooting, be sure to check the battery
power.
+ The shooting capacity is reduced to about 1/3 of
normal if the camera is used at low temperatures.
+ When traveling or planning to take many pictures,
be sure to take a supply of spare batteries, they
may not be available where you are.
+ Shooting continuously with the flash will cause the
battery power to fall momentarily, and the LCD
panel display may be incorrect. Tum the power off
and wait a while before turning it back on.

Publicité

loading