Publicité
Setting and Adjusting the Date/Time
After changing the battery, or when traveling
internationally, it may be necessary to set or adjust the
camera's date and time using the following procedure.
If "-- — — blinks on the LCD panel when you
change the battery, perform steps 2, 3, 4, and 6.
DATE button
selec (=O) se
Select button
Set button
B-40
Press the DATE button to
display the Date mode.
+ The time is set in Date +
Time mode, step 5.
Press the Select button.
+ Use the push-button
projection on the strap
clasp.
= When you replace the
battery, the blinking
E
display changes to
98 1
+ The digits to be set start
blinking.
Press the Set button.
+ Use the push-button
projection on the strap
clasp.
+ Press repeatedly until the
blinking digits show the
desired value.
Publicité
