Publicité
4 Press the shutter
BE
> button halfway.
=» The red-eye reduction
lamp lights up and the
'shutter will not release for
about one second.
* Keep the shutter button
pressed halfway.
= After about one
second, press the
shutter button fully.
=> The flash fires and the
shutter is released.
When the red-eye reduction lamp lights up, the
|
shutter will not release for about one second. This is
|
to increase the effectiveness of the red-eye reduction
|
function. If you want to shoot right away, turn the red:
|
eye reduction function off with the flash mode button
i
(05).
Important guidelines for using the red-eye
reduction function
1. This function is not effective unless the subject looks
directly at the red-eye reduction lamp while it is lit.
Be sure to tell your subject to look straight at the
lamp.
2. Stay within 2 m (6.6 ft.) of your subject.
3. The efficacy of the red-eye reduction function varies
from person to person.
4. Try to raise the ambient light level as much as
possible.
Publicité
