Publicité
1] Inserting the Battery
Battery: One lithium battery (CR2)
B
Open the battery cover.
+ While pressing the ridges
on the battery cover, lift off
the cover.
Insert the battery.
+ Insert the battery with the +
and — terminal positioned
correctly with the release
tape (A) is behind the battery.
= The [EEE indicator is
displayed on the LCD
panel.
Close the battery cover.
+ Be careful not to trap the
release tape when closing
y,
the battery cover,
mp If"
< " blinks in the LCD
panel, after you change
the battery, you will need
to reset the date to the
correct date and time
(540).
Removing the Battery
+ Slowly pull the end of the release tape to remove the battery.
ter removing the battery to replace it, do not touch
any of the switches on the camera. This will allow the
date and time settings to be retained for
approximately five seconds.
B-15
Publicité
