Publicité
6.1 Digital display
Display shows voltage, frequency, partial and total hours.
Press the "Mode Button" to switch the data that the display shows.
6.2 Generator overload and reset
In case of an overload, the magneto-thermal circuit breaker for overload protection
will switch to the OFF position automatically, turning off the voltage output.
In case of overload, first of all turn off the connected equipment.
As soon as the equipment is disconnected, reset the circuit breaker, placing it in
the ON position (toggle circuit breakers) or pressing the button (button circuit
breakers) to restore the generator voltage output.
If when connecting the equipment, the magneto-thermal overload circuit breaker
trips again, stop connecting the equipment. Connected equipment may have a
problem or overpower the generator.
67
Publicité
