Publicité
4. Turn the fuel selector to the gasoline position as shown in the image below.
NOTE: Always turn the fuel selector until reaching the exact "GASOLINE"
point. Do not leave the selector in an intermediate position.
5. Disconnect equipment from the generator, never start or stop the generator with
connected loads.
6. Press the starter switch to the "START" position, and release it as soon as the
engine has started, as shown in the following image.
NOTE: If the engine does not start in 3 or 4 seconds, release the start button
and wait a few seconds to try again. Otherwise, it may overheat and damage the
starter motor.
55
Publicité
