Publicité
Purchase a regulator approved and according to the type of cylinder sold by
distributors in your area. The regulator outlet pressure will be 30mbar and the
guaranteed flow (flow) will be 2.5Kg / hour or more.
1
Connect the supply hose to the pressure regulating valve, fixing with a clamp
(not included).
2
On the generator control panel, connect the hose to the propane inlet. Apply a
clamp (not included) to fix the hose correctly.
HOSE
PROPANE GAS CYLINDER
Before using the generator, check if there are no leakages in the connections of
the propane hose. To do that, open the regulating valve in the cylinder so that the
hose can have pressure.
Then spray the hose connections with a mixture of soap and water. To do that,
use a sprayer. In case of leakage, bubbles will always be detected (even if
small).If there is no leakage, clean and dry the hose and its connections.
If you see or smell a leakage and you are unable to repair it, close the valve on the
cylinder regulator and contact a plumber or a gas installer. Thus, the connections
will be made correctly.
PRESSURE
REGULATOR
53
Publicité
