Publicité
SAFETY & PRECAUTIONS
INSTALLATION INSTRUCTIONS
STEP 2. INSTALLING THE WALL BRACKET
1.
Detach the silver mounting bracket attached to the back of your indoor unit.
2.
Line up the bracket with the screw and hole locations marked previously on your wall.
3.
Mount the bracket on the wall using the 6 screws provided. Be sure that you are screwing directly
into the two studs found earlier. If your wall does not have a stud, you will need to use wall anchors
(Mollies) to secure the mounting bracket. (see Figure 2.1)
Screw
CONCRETE OR BRICK WALLS
If the wall is made of brick, concrete, or similar material, drill 5/16 in diameter holes in the wall and insert the
sleeve anchors provided. Secure the mounting plate to the wall by tightening the screws directly into the wall
anchors.
NOTE:
The shape of your mounting plate may be different from the one above, but the installation
method is similar.
16
Mounting Plate
Figure 2.1
CONTINUED
CONTINUED
(Continued)
Publicité
