Publicité
3.1.3 Install the filter module in the filter holder
Refer to the illustrated steps that follow to install the filter module.
After the filter module is installed, pull one or two times on the filter module to make sure that the filter module is
correctly engaged.
3.2 Electrical installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
Electrocution hazard. Always remove power to the instrument before making electrical connections.
3.2.1 Install the heated sample hose
Electrocution hazard. Do not shorten the heated sample hose under any circumstances.
Refer to the illustrated steps that follow to connect the heated sample hose to the analyzer and to the
filtration system. The heated sample hose includes the sample tubing, air tubing and the wires for the
heating connection.
N O T I C E
D A N G E R
D A N G E R
C A U T I O N
English 9
Publicité
