Publicité
Section 6 Parts and accessories
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement parts
Description
Filtration module
Accessories
Description
Pole mount hardware
Rail mount hardware
Cleaning set, includes:
• Empty bottle, 1 L (2.5 gal)
• Tubing cap
• Tubing
• Straight connector
• Y-connector
Cleaning tub
Silicone / TPE brush
Chlorine bleach (sodium hypochlorite), 5%
Hydrochloric acid, 10%
Extension pipe with side hole, 1 m
Section 7 Troubleshooting
Problem
Channel 1 sample flow is low
(or CH1 SAMPLE FLOW LOW)
Turbidity is seen in the sample.
5
LCW1111 and LCW1112 are only available in the EU.
W A R N I N G
Possible cause
The filter is clogged by
fouling.
The filter is not correctly
installed.
The filter is defective.
Quantity
1
Quantity
1
1
1
1
1
1
1
1
Solution
Clean the filter module. Refer to
module
on page 16.
Clean the filter module. Refer to
module
on page 16.
Clean the sample tubing. Refer to
tubing manually (optional)
Examine the connection of the filter module to the
module connector. Refer to
in the filter holder
on page 9.
Replace the filter. Refer to
on page 21.
Item no.
LXZ464.99.00018
Item no.
LZY714.99.42050
LZX414.99.62050
LZX217
LXZ461.99.00093
LXZ461.99.00094
5
LCW1111
5
LCW1112
LZY714.99.000A0
Clean the filter
Clean the filter
Clean the sample
on page 22.
Install the filter module
Replace the filter module
English 25
Publicité
