Publicité
Recommended minimum 1/2" (13mm) drywall installation.
Refer to the dimensions to locate the cuts on the wall.
Cut a 4-1/2" (114mm) diameter hole for the outlet drain.
Cut a 2-1/2" (64mm) diameter hole for the water inlet.
Cut two 3/4" (19mm) diameter holes for the threaded mounting stud.
Cut a 8-7/8" (226mm) x 5-9/16" (140mm) hole for the push plate.
Dimensions are based on toilet rim height 16-1/8" (410mm)
10. Cutting Out the Wall Location
11
Publicité
