Publicité
Use Procedure
Controller Start-up
To start-up the controller, turn the main switch to ON, after plugging
the power cable into a suitable power source.
Starting the Pump
The pump starts only when the controller is turned on and the two
interlocks (H.V. Cable and Remote ON/OFF) are short-circuited.
Please refer to section "Technical Information" for further
information.
Pump Shutdown
To shutdown the pump, turn the main switch placed on the front
panel to OFF.
MicroVac Controller User Manual / 87-900-089-01 (G)
Instructions for Use
Use Procedure
47/72
4
Publicité
Chapitres
