Publicité
4
Instructions for Use
Use
Pascal or Millibar Graduated Scale Installation
Pascal or Millibar Graduated Scale Installation
(Supplied as a Fitting)
(Supplied as a Fitting)
The MicroVac series controllers are supplied with the pressure scale
The MicroVac series controllers are supplied with the pressure scale
expressed in Torr (Torricelli); however, it is possible to replace it
expressed in Torr (Torricelli); however, it is possible to replace it
with another one, a Pa (Pascal) or mBar (Milibar) graduated scale
with another one, a Pa (Pascal) or mBar (Milibar) graduated scale
(supplied as a fitting). To replace, proceed as follows.
(supplied as a fitting). To replace, proceed as follows.
After removing the desired label from the fitting package, put label A
After removing the desired label from the fitting package, put label A
on the existing one, matching the holes C; then fix it using the push
on the existing one, matching the holes C; then fix it using the push
locks B.
locks B.
Figure 4
46/72
Pascal or Millibar Graduated Label Installation
MicroVac Controller User Manual / 87-900-089-01 (G)
Publicité
Chapitres
