Publicité
5
Technical Information
MicroVac Controller Description
MicroVac Controller Description
The MicroVac controller is a quarter rack solid state power supply
with self protection features, which generates the high voltage for the
pump.
The MicroVac ion pump controller is designed to operate the Mini
and the 2 l/s ion pumps, but can also operate the 8 l/s ion pump.
The controller is designed to withstand continuous operation at short
circuit condition, without any damage to the ion pump or to the
controller itself.
The MicroVac controller is available in two versions, which differ in
the factory-set input voltage and in the high voltage output connector
type.
A voltage change over allows to select different operating voltages.
Inspect the controller for any shipping damage.
WARNING!
The MicroVac controller is equipped with a 3-wire power cord and plug
(internationally approved) for user's safety. Use this power cord and plug in
conjunction with a properly grounded power socket to avoid electrical shock.
High voltage developed in the controller can cause severe injury or death.
Before servicing the unit, disconnect the input power cable.
50/72
Model 929-0200 KINGS type High voltage connector (120 Vac,
50/60 Hz)
Model 929-0201 KINGS type High voltage connector (220 Vac,
50/60 Hz)
Model 929-0200 is factory set for 120 Vac operation.
Model 929-0201 is factory set for 220 Vac operation.
MicroVac Controller User Manual / 87-900-089-01 (G)
Publicité
Chapitres
