Bimar KPT-2000B 5208LE Notice D'instructions page 18

Drill 2 perfectly horizontal
holes, with a distance of 39.5
cm and at least 215 cm from
the floor.Insert the expansion
dowel and drive in screws with
head havinga 8mm diameter,
suitable to fit in the slots (see
figure on the side)
•
Ensure that the power cord is correctly positioned and does not come into contact with hot parts
or sharp edges, or become wound around the appliance itself and is not twisted.
•
In the event of a fault or malfunction, switch off the appliance and have it checked by a qualified
technician.
USO
The functions of this appliance can be started using they keyboard of the control panel or the
remote control which has to be pointed in the correct direction (at a max distance of 4m).
Do not allow children to replace battery.
Insert n.1 battery type: "CR2025. 3V" of the remote control (not included
in the package), move the plastic tab to the right (→ PUSH) and
simultaneously remove the battery slot (↓ OPEN). Insert the battery
(following the right polarity: +/-) and close the battery slot.
For long periods remove the battery.
The remote control is divided in 3 areas:
Area which contains the buttons for normal mode.
Area which contains the buttons to confirm the
selected mode.
Area which contains planning buttons.
18