Publicité
VOLUME SCREENS
The graphic below shows the VOLUME screens:
+ Button
Pressed
The console is equipped with a beeper that shall be used to generate tones for button press-
es and various system related events. The volume of this beeper is adjustable in order to
allow users to control how loud or quiet they desire the tones to be. The PLUS and MINUS
buttons shall be used to adjust the volume level. There are three choices to pick from and
they are as follows: HIGH (i.e. full volume), LOW (i.e. half volume), and OFF (i.e. Muted; no
sound Also, each time the PLUS or MINUS buttons are pressed the volume of the tone
played shall match the current set volume level. The set volume level can be saved by press-
ing the START/ENTER button. Pressing the START/ENTER button also transitions the
system back to the SETTINGS screens. The default volume level is HIGH.
To exit the VOLUME screens and revert the volume to the last saved value, press the
WORKOUTS button. Pressing the WORKOUTS button also transitions the system back to
the SETTINGS screens.
UNITS SCREENS
The graphic below shows the UNITS screens:
To select either Metric or Imperial units. Use the PLUS or MINUS button to select the
desired option. To save the unit choice press the START/ENTER button. Pressing the
START/ENTER button also transitions the system back to the SETTINGS screens. The
default unit setting shall be Metric Units.
To exit the UNITS screens and revert the unit choice to the last saved value, press the
WORKOUTS button. Pressing the WORKOUTS button also transitions the system back to
the SETTINGS screens.
- Button Pressed
+ Button Pressed
- Button Pressed
+ Button Pressed
|
- Button Pressed
+ Button Pressed
- Button
Pressed
ENGLISH 47
Publicité
