Publicité
PROGRAM MODE
Upon transitioning to this mode, time shall begin incrementing, distance shall begin accumulat-
ing, energy shall begin accumulating, and all other displays shall become active. The specifics
of the workout views are described below.
The following fields are available during a standard workout:
•
Time – The elapsed time for the workout in MMM:SS format
•
Distance – The distance, in kilometers or miles, the user has "traveled" in the given
workout
•
Energy – The amount of KCAL/KJ the user has burned through the workout
•
RPM – The current cadence the user is pedaling
•
Speed – The current speed the user is "traveling" at
•
Heart Rate – The user's current heart rate as measured from their wireless HR strap
•
Level – The current resistance level setting
STANDARD WORKOUT SCREENS
For quick workouts that are initiated by hitting the START/ENTER button from the IDLE
SCREEN or workouts that are initiated by selecting a TIME GOAL, DISTANCE GOAL, or
ENERGY GOAL the following screen shall be provided during the workout.
Alternatively, during a standard workout, a user may choose whether they want to display
Speed, RPM or Heart Rate. Below are different versions of the standard workout screen
showing the different data displayed in the Key Metrics Zone. Not all combinations
of the selected Units or Energy type are shown however. By default the console shall
automatically screen between showing Speed, RPM, Heart Rate, etc. every 3 seconds.
The user may override this behavior by pressing the WORKOUTS button. For each press
of the WORKOUTS button the displayed value shall switch to the next parameter in the
order specified above. If the user has pressed the WORKOUTS button at least once, the
automatic switching stops. To reengage the automatic switching, the user must press and
hold the WORKOUTS button for 5 seconds.
NOTE: The above screen includes simulated data for illustration purposes and assumes
that the Units selection in Settings mode is set to Metric and therefore KM is shown for
distance and KM/H is shown for speed. If the Units selection was set to Imperial, MILES
would be displayed for distance and MPH for speed. Additionally, the above screen assumes
that the Energy selection in Settings mode is set to KCAL. If the Energy selection was set
to KJ, KJ would be displayed. The screen above shows that Speed is selected for the Key
Metrics Zone.
|
ENGLISH 39
Publicité
