Publicité
|
DISTANCE GOAL Workout
NOTE: The above screen assumes that the Units selection in Settings mode is set to Metric
and therefore the distance goal is based on kilometers. If the Units selection was set to
Imperial, MILES would be displayed and the distance goal would be based on miles.
On the DISTANCE GOAL screen the user shall be able to choose the desired distance
for their workout. The user shall be able to enter a distance from 1.00 to 9999 kilometers
(Metric Units Setting) or miles (Imperial Units Setting). The default value shall be 20.00
kilometers or miles. The user can adjust the value up or down by using the PLUS and MINUS
buttons respectively. Each press of either the PLUS or MINUS button shall change the cur-
rent displayed value by 1.00. The PLUS button shall be used to increase the length and the
MINUS button shall be used to decrease the length.
Once the distance is set to the desired value for the given workout the START/ENTER but-
ton shall be pressed. Upon pressing the START/ENTER button the system shall transition to
PROGRAM MODE and the workout shall begin. See section PROGRAM MODE below for
more details.
To exit the DISTANCE GOAL screen and return to the WORKOUT SELECTION screen the
user shall press the WORKOUTS button.
ENGLISH 33
Publicité
