Télécharger Imprimer la page

Stihl BGA 30.0 Notice D'emploi page 34

Publicité

English
► Observe the following points when storing the
charger:
– Charger is out of the reach of children.
– The charger is clean and dry.
– Charger is in an enclosed space.
– The charger is not suspended from the con‐
necting cable or the holder (3) for the con‐
necting cable.
– Do not store the charger outside of the
specified temperature limits,
14 Cleaning
14.1
Cleaning the blower
► Switch off the blower and remove the battery.
► Clean blower with a damp cloth.
► Clean vents with a paintbrush.
► Clean the shield with a paintbrush or soft
brush.
► Remove foreign objects from the battery com‐
partment and clean the battery compartment
with a damp cloth.
► Clean the electrical contacts in the battery
compartment with a paintbrush or soft brush.
14.2
Cleaning the Battery
► Clean the battery with a damp cloth.
14.3
Cleaning the Charger
► Disconnect the mains plug from the power
supply.
► Clean the charger with a damp cloth.
16 Troubleshooting
16.1
Troubleshooting the blower or battery
Error
LEDs on the
blower
The blower does
1 LED flashing
not start when
green.
switched on.
1 LED lights
up steady red.
1 LED flashes
red.
1 LED lights
up red.
1 LED flashes
red.
34
► Clean the charger's electrical contacts with a
paintbrush or a soft brush.
15 Maintenance and Repairs
15.1
The blower cannot be serviced or repaired by the
user.
17.5.
► If your blower has a malfunction or is dam‐
aged or requires servicing: Contact your
STIHL servicing dealer.
15.2
The battery requires no servicing and cannot be
repaired.
► If the battery has a malfunction or is damaged:
Replace the battery.
15.3
The charger does not need servicing and it can‐
not be repaired.
► If the charger has a malfunction or is dam‐
aged: Replace the charger.
► If the connecting cable has a malfunction or is
damaged: Do not use the charger and have
the connecting cable replaced by a STIHL
servicing dealer.
Cause
State of charge of the
battery is too low.
The battery is too
warm or too cold.
There is an error in
the blower.
The blower is too
warm.
There is an error in
the battery.
Servicing and Repairing the
Blower
Servicing and Repairing the
Battery
Servicing and repairing the
charger
Remedy
► Charge the battery.
► Remove the battery.
► Allow the battery to cool down or warm
up.
► Remove battery and reinsert it.
► Switch on the blower.
► If 1 LED continues to flash red: Do not
use the blower and contact a STIHL
authorized dealer.
► Remove the battery.
► Allow the blower to cool down.
► Remove the battery.
► Clean the electrical contacts in the bat‐
tery compartment.
► Insert the battery.
► Switch on the blower.
14 Cleaning
0458-062-9601-A

Publicité

loading