Do not modify or open the battery. There is a risk of
u
short-circuiting.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
WARNING
Ensure that the coin cell is kept out
of the reach of children. Coin cells
are dangerous.
Coin cells must never be swallowed or inserted into
u
any other part of the body. If you suspect that
someone has swallowed a coin cell or that a coin cell
has entered the body in another way, seek medical at-
tention immediately. Swallowing coin cells can result in
severe internal burns and death within 2 hours.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for punching holes in sheet
metal.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Punching head
(2) Reset button
(3) Status indicator
(4) USB port
a)
(5) Rechargeable battery
a)
(6) Battery release button
(7) Worklight
(8) Handle (insulated gripping surface)
(9) On/off button
Bosch Power Tools
(10) Tension bolt
(11) Spacer bushing
a)
(12) Die
a)
(13) Punch
a) This accessory is not part of the standard scope of delivery.
Technical Data
Hydraulic cordless punch press
Article number
Rated voltage
Max. pressing force
Max. sheet thickness
– Steel
– Stainless steel
Punch head turning range
USB standard for power tool
USB cable for data transfer
(commercially available)
B)
Weight
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation
Permitted ambient temperature
during storage
Recommended rechargeable
batteries
Recommended battery chargers
A) USB Type-C® and USB-C® are trademarks of USB Implementers
Forum.
B) Weight without rechargeable battery
(Weight of rechargeable battery can be found on
http://www.bosch-professional.com)
C) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and
environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑1.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). The noise level when working can ex-
ceed the declared values.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841‑1:
a
< 2.5 m/s², K = 1.5 m/s².
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
English | 15
GLH 18V‑60
3 601 JP0 2..
V
18
kN
60
mm
3
mm
2.5
°
360
USB 2.0
A)
USB Type-C®
kg
2.2
°C
0 to +35
°C
–10 to +50
°C
−20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
1 609 92A B0Z | (22.11.2024)