Publicité
14 | English
When battery pack is not in use, keep it away from
u
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from
u
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
u
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to fire or excess-
u
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
Follow all charging instructions and do not charge the
u
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of bat-
u
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety Instructions for Hydraulic Cordless Punch
Presses
WARNING!
Wear safety goggles.
Never reach into the work area of the tool
head, unless a safe operational stop is en-
sured. You can only ensure that the power tool
is at a safe operational stop if the punch press
is fully open and the battery has been removed.
The power tool must only be operated by trained pro-
u
fessionals who are aged 16 or over. This will reduce the
danger to persons.
The power tool must only be operated by one person.
u
Direct other persons out of the hazardous zone of the
power tool. This will reduce the danger to persons.
Only operate the power tool if the tool head is visible
u
and you can ensure that no limbs are in the danger
zone. This will allow you to avoid injury.
1 609 92A B0Z | (22.11.2024)
Stop the power tool by releasing the on/off button if
u
there is danger to persons or the machine while you
are working.
In emergencies and before starting work with the
u
power tool, you can move the power tool into the
starting position by using the mechanical return. Be-
fore setting the power tool down or after finishing
work, shut down the pressing tool and depressurise it.
Press the reset button to depressurise the power tool.
Only operate the power tool by hand. The on/off but-
u
ton and the reset button must be within reach so that
they can be pressed in an emergency.
It is prohibited to use the power tool in a fixed posi-
u
tion. It must be neither placed on the ground nor
clamped in a clamping device for use.
Before starting work, ensure that there are no live
u
parts in the work area. If there are live parts in the vi-
cinity, take appropriate protective measures. The
power tool is not suitable for working on live parts.
Remove the battery before you insert the punch press
u
template. This safety measure prevents the power tool
from being started accidentally.
Do not operate the power tool in an explosive environ-
u
ment.
Do not open the power tool. Safe operation is then no
u
longer guaranteed and the warranty claim becomes void.
In order to prevent the power tool from overheating,
u
do not use the power tool in continuous operation for
more than 15 minutes. The power tool is not designed
for continuous operation.
Do not touch the punching head until it has cooled
u
down. The punching head may become hot when oper-
ated continuously.
If you are working in an elevated position, secure the
u
power tool sufficiently using a fall protection system
and ensure that there are no persons below the work
area. Wear protective headgear when carrying out
overhead work. This will enable you to avoid material
damage and personal injury if you inadvertently drop the
power tool.
In the event of oil loss, the power tool must be sent
u
back to the manufacturer.
Avoid contact with leaking hydraulic fluid. Clean your
u
skin thoroughly with soap and water in the event of
any contact. Rinse your eyes immediately with plenty
of water for at least 10 minutes in the event of any
contact. Contact with hydraulic fluid can cause irritation
and allergic reactions.
Only remove the battery once the power tool has been
u
shut down safely.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Bosch Power Tools
Publicité
