Maintenance; Cleaning - Amprobe VPC-12 Mode D'emploi

Humidity
(without condensation)
Pollution degree
Power supply
Battery life
Dimensions (H x W
x D)
Weight
Electrical safety
Overvoltage category
EMC
Agency approvals

MAINTENANCE

W Caution
- To prevent damage to the VPC-12:
• Do not attempt to repair or service the VPC-12 unless qualified to do so.
• Make sure that the relevant calibration, performance tests, and service
information is being utilized.
• Do not use abrasives or solvents.

Cleaning

The only maintenance the VPC-12 requires is inspection and cleaning.
Periodically wipe the case with a mild solution of detergent and water.
Apply sparingly with a soft cloth and allow time to dry completely before
using. Do not use aromatic hydrocarbons, gasoline or chlorinated solvents
for cleaning.
≤ 80% RH at 41
≤ 50% RH at 104
2
Three 1.5 V batteries, AAA, LR03, UM4
60 hours (alkaline) (typical)
5.90 x 2.13 x 1.34 in
150 x 54 x 34 mm
Approximately 0.45 lb (205 g) with batteries
installed
CAN/CSA-C22.2 No. 61010-1-12, UL Std. No. 61010-
1 (3rd Edition),
CAN/CSA-C22.2 No. 61010-031-07,UL 61010-031
(1st Edition - 2007),
CAN/CSA-C22.2 No. 61010-2-030-12, UL 61010-2-
030(1st Edition -2012)
CAT IV 600 V
Conforms to IEC 61326-1
) P
10
F to 104 F / 5 C to 40
O O O
F to 122 F / 40
O O
C;
O
C to 50 C
O O