Publicité
ADVENTURER BALANCES
Find Quality Products Online at:
5.3.4
Filter Level
Set the amount of signal filtering.
LOW
= faster stabilization time with less stability.
MEDIUM
= normal stabilization time with normal stability.
HIGH
= slower stabilization time with more stability.
5.3.5
Auto Zero Tracking
Set the automatic zero tracking functionality.
OFF
=
disabled.
0.5 D
=
display maintains zero up to a drift of 0.5 graduation per
second
1 D
=
display maintains zero up to a drift of 1 graduation per
second.
3 D
=
display maintains zero up to a drift of 3 graduations per
second.
5.3.6
Auto Tare
Set the automatic Tare.
OFF = disabled.
ON = enabled.
'Place container on the pan' will be displayed when an Automatic Tare is about to
start.
A Deactivate button is displayed underneath the text. Press this button to
deactivate the Automatic Tare function
5.3.7
Graduations
Set the displayed readability of the balance.
1 Division = standard readability.
10 Divisions = readability is decreased by a factor of 10.
For example, if the standard readability is 0.01g, selecting 10 Divisions will result in a
displayed reading of 0.1g.
5.3.8
Date & Time
Set the current Date and Time.
Change the format (if desired), then enter the current value.
Press Save to confirm the new value.
Date Setup
Click the number corresponding to the
year, month, or day, and short press the
Clear button to clear it. Enter the correct
value and click Save.
Time Setup
Click the number corresponding to the
hour and minute, and short press the
Clear button to clear it. Enter the correct
value and click Save.
Note: The value corresponding to the
second cannot be set manually.
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
EN-35
Publicité
