Publicité
EN-20
To measure the density,
Step 1 of 2 – Weigh the Sample in Air.
Press Start. Follow screen instructions, then
press Accept
to store the dry sample weight
("in air").
Step 2 of 2 – Weigh the Sample
Submerged in the Liquid.
Follow the screen instructions, then press
Accept
to store the sample weight (submerged
in liquid).
Measure Result
Once the necessary weights have been determined, the density of the sample is displayed in g/cm
(along with the weight in air, weight in water) on the Application screen.
Press Start to reset all the weight values and restart the process.
4.5.2
Measuring the Density of a Buoyant Material Using Water
Press the Item Settings button to open Settings screen.
Confirm the following Setups are selected:
✓ Density Type: Solid
✓ Liquid Type: Water
✓ Porous Material: Off
✓ g/cm
weighing result.
Press Back to return to the Density Determination home
screen.
Follow the same procedure as Solid Material above, except
in Density Determination step 2, push the sample down into
the liquid until it is fully submerged.
4.5.3
Measuring the Density of a Solid Using an Auxiliary Liquid
To enable this feature, enter the Density Determination Setup menu and select the following:
Density Type: Solid; Liquid Type: Other; Porous Material: Off.
Find Quality Products Online at:
: to select the display resolution of Density's
3
GlobalTestSupply
www.
ADVENTURER BALANCES
ax
22 g
d
.
g
3
.com
sales@GlobalTestSupply.com
Publicité
