Publicité
ADVENTURER BALANCES
6. Press Save to USB to save the results to a USB flash drive or Exit to return to the Formulation Home
screen.
Note: The formulation results will be cleared when a new formulation starts.
4.9.1
Item Settings
To view or adjust the current settings
Touch the Item Settings button. The Settings screen
appears.
Filler: If set to On, a filler material is asked for
at
the end of the formulation.
Automatic Mode: If set to On, the balance will
automatically Tare after the component weight
has been accepted.
Print settings: Change printing settings. See
section 7 for more information.
4.10
Additional Features
4.10.1 Weigh Below
The Adventurer balance is equipped with a weigh below hook for weighing below the balance.
Note: Before turning the balance over, remove the pan and draft shield elements (if present) to prevent damage
Note: Before turning the balance over, remove the pan and
Attention: Do not place the balance on the pan support cone or Load cell Pins
To use this feature, remove power from the balance, then remove the protective cover for the weigh below opening.
The balance can be supported using lab jacks or any other convenient method. Ensure the balance is level and
secure. Power on the balance, then use a string or wire to attach items to be weighed.
Find Quality Products Online at:
Weigh below
protective cover
GlobalTestSupply
www.
Weigh below hook
.com
sales@GlobalTestSupply.com
EN-29
Publicité
