Publicité
ADVENTURER BALANCES
4.2.1
Item Settings
To view or adjust the current settings
Touch the Item Settings button. The Settings screen
appears.
Samples: The sample size can be 1 to 10 000
pieces. The default sample size is 10. Once a
sample size is changed, the balance will
immediately open the recalculate APW screen,
expecting to establish a new APW.
To adjust the sample size, touch the
Samples button.
A numeric input window appears.
Use the keys to enter the desired sample size,
then press Save.
The next screen appears, with the message to place
the reference weight on the pan.
Place the reference weight on the pan, then touch
Accept to capture the value, the screen shows
number of pcs.
Establish an Average Piece Weight (APW):
Each time a new type of part is counted, the nominal
weight of one piece (Average Piece Weight or APW)
must be established using a small quantity of pieces.
This APW is stored until replaced by another APW.
There are two methods to establish the APW value:
1.
2.
case the current sample size will be used
Find Quality Products Online at:
The actual APW is known
The APW must be derived by weight. For this
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
EN-15
Publicité
