Publicité
EN-22
Step 1 of 2 – Weigh the Sinker in Air.
Follow the screen instructions, then press Accept
to store the sinker weight ("in air").
Step 2 of 2 – Weigh the Sinker Submerged in the Test
Liquid.
Follow the screen instructions, then press Accept
to store the sinker weight (submerged in liquid).
Once the necessary weights have been determined,
the density of the Liquid sample is displayed in g/cm
(along with the weight in air, weight in water)
on the Application screen.
Press Start to reset all the weight values and restart the
process.
4.5.5
Measuring the Density of Porous Material Using Oil
To enable this feature, enter the Density Determination
Setup menu, and set the following:
✓ Density Type: Solid
✓ Liquid Type: Water
✓ Porous Material: On
✓ g/cm
Density's weighing result.
Find Quality Products Online at:
3
: to select the display resolution of
GlobalTestSupply
www.
ADVENTURER BALANCES
3
.com
sales@GlobalTestSupply.com
Publicité
