Publicité
In this way you can go through and edit any number of the para-
meters to create the required equalization. If, however, you select
and recall a new effect without first storing your edited parame-
ters in a memory location between 31 and 90, any changes you
have made will be lost and will have to be re-programmed. If
you want to keep an edited effect, use the STORE operation
described below.
|
* Tt is possible to continuously increment or decrement the para-
meters by simultaneousły pressing the PARAMETER
and
Nor V keys.
STORING AN EDITED PROGRAM
IN THE USER MEMORY
In order to store an edited program for later recall you need to do the
following:
(D After editing the program, select a memory location between 31
and 90 using the program select /\ and (7 keys. Do not recall
the selected memory location. If no data has been previously
stored in the selected memory location the LCD will read "+
NO DATA ****,* If an edited program has previously been
stored in the selected memory location, its title will be displayed
on the LCD.
|
|
|
@) Press the STORE key to store the edited program in the selected
memory location. The title of the program stored will appear on
the LCD (this may later be edited to create your own title using
the UTILITY mode EDIT TITLE function). The LED memory
number display will stop flashing the stored memory location
will become the active program.
GEQ
1/1oct
LER
Edited
dite program |
R OUT
LEVEL=
73
New
program
|
number `
an
DYN.
FILTER
LFO
—fash= |
DAL
LPF
t
L=R
Stored program
an
GEQ
17106
bh
R
OUT
LEVEL=
73
Publicité
