Publicité
* Tf the CONVERT function is executed while a program number
between 1 and 30 is selected, the CONVERT operation will be
canceled.
This function makes it possible to independently adjust the input
* When a program is converted using this function, the original
attenuation (sensitivity) of the left and right channels when using
program is erased. If you wish to keep the original program,
the DEQ7's DIGITAL IN terminal. It is essential to set these para-
make another copy of it in a RAM memory location using the
meters properly to avoid "skipping" and digital noise that may
STORE function.
occur with high-level digital input signals. The INPUT ATTENU-
ATOR control range is from 0 to 60 dB.
* User-edited titles are erased when programs are converted, and
@ Use the parameter editing A and V keys to set the required
amount of attenuation for the left channel.
@) Press the UTILITY key one more time to call the "INPUT
ATTENUATOR RIGHT" function.
@ Use the parameter editing A and Y keys to set the required |
amount of attenuation for the right channel.
Hold the UTILITY key down until the UTILITY mode is ex-
ited.
|
INPUT
ATTENUATER
LEFT
=
+
0d8
INPUT
ATTENUATER
LEFT
=
~12dB
INPUT
ATTENUATER
RIGHT=
+
0dB
13
Publicité
