Publicité
12
Single Program Bulk Dump
Bach time a program is recalled using the RECALL key, a bulk
dump of the recalled program is performed via the MIDI OUT ter-
minal. If the transmitted program is between 31 and 90, it will be
stored in the correspondingly numbered location in the receiving
DEQ7.
Bulk Dump Reception
The DEQ?7 will automatically x receive a bulk dump of program or
bank data when a MIDI BULK DUMP REQUEST signal is received
from the transmitting device.
DELAY DISPLAY
The DEQ7 offers you a choice of delay display (the L DELAY and
R DELAY parameters called by the DELAY/LEVEL key) in sec-
onds, meters or feet. The METER and FEET display options are a
handy guide when the DEQ7 delays are used to compensate for
physical distances between speaker systems in large sound installa-
tions.
(D Press the UTILITY key a few times until the DELAY DISPLAY
function appears.
(2) Use the parameter editing  and VJ keys to select the SEC-
OND, METER or FEET display option.
Hold the UTILITY key down until the UTILITY mode is exited.
DELAY
DISPLAY
UNIT
SECOND
DELAY
DISPLAY
UNIT
FEET
CONVERT L=R — L/R
ME
This function converts L-R programs (programs 1, 4, 7, 13, 16, 18
and 21) stored in the RAM memory to the equivalent L/R types,
thus allowing independent programming of the left and right chan-
nel parameters. It can also be used to convert the Lch GEQ pro-
grams (9 and 11) to the corresponding Rch types, and the Rch GEQ
programs (10 and 12) to the corresponding Lch types.
(D Select the program stored in the RAM memory area which is to
be converted.
(2) Press the UTILITY key a few times until the CONVERT func-
tion appears.
©) Press the program selection / key to perform the conversion.
Hold the UTILITY key down until the UTILITY mode is exited.
Selected
program
PEQ
(4+4)
L=R
PEAK
225
Hz
E
CONVERT
?
L=R
=>
L/R
Display corresponds
to the type of
program selected.
*If a program which is NOT of the L=R, Lch or Rch type is
selected, the CONVERT function will be skipped.
Publicité
