Mitsubishi Electric M Serie Manuel D'installation page 6

3. Safety precautions
Before installing the unit, make sure you read all the
"Safety precautions". The "Safety precautions" pro-
vide very important points regarding safety. Make
sure you follow them.
3.1. Symbols used in the text
WARNING
Describes precautions that should be observed to
prevent danger of injury or death to the user.
CAUTION
Describes precautions that should be observed to
prevent damage to the unit.
WARNING
Carefully read the labels affixed to the main unit.
3.2. Before installation and elec-
tric work
Before installing the unit, make sure you read all the
"Safety precautions". The "Safety precautions" pro-
vide very important points regarding safety. Make
sure you follow them.
WARNING
• The unit must be installed by an authorized
Dealer or properly trained technician.
– Improper installation by the user may result
in water leakage, electric shock, or fire.
• Install the air unit in a place that can withstand
its weight.
– Inadequate strength may cause the unit to
fall down, resulting in injuries.
• Use the specified cables for wiring. Secure the
connections so that the outside force of the
cable is not applied to the terminals.
Specifications are subject to change without notice.
SVZ-KP12, 18, 24, 30, 36NA
– Inadequate connection and fastening may
generate heat and cause a fire. Provide
strain relief to wiring.
• Prepare for typhoons, hurricanes, earthquakes,
etc., and install the unit at the specified place.
– Improper installation may cause the unit to
topple and result in injury.
• Never repair the unit. If the air conditioner must
be repaired, consult the dealer.
– If the unit is repaired improperly, water leak-
age, electric shock, or fire may result.
• Do not touch the heat exchanger fins.
– Improper handling may result in injury.
• When handling the product, always wear pro-
tective equipment.
– E.g.: Gloves, full arm protection, and safety
glasses.
– Improper handling may result in injury.
• Install the air conditioner according to this In-
stallation Manual.
– If the unit is installed improperly, water leak-
age, electric shock, or fire may result.
• Have all electric work done by a licensed elec-
trician according the "National Electrical code
and local Electrical codes" and "Interior Wire
Regulations" and the instructions given in this
manual and always use a special circuit.
– If the power source capacity is inadequate or
electric work is performed improperly, electric
shock and fire may result.
• Keep the electric parts away from water.
– It might result in electric shock, catching fire
or smoke.
• When cleaning the Heat Exchanger and Drain
Pan, ensure the Control Box, Motor and LEV
remain dry, water proof covering.
• When installing and moving the air conditioner
to another site, do not charge it with a refriger-
ant different from the refrigerant specified on
the unit.
– If a different refrigerant or air is mixed with
the original refrigerant, the refrigerant cycle
may malfunction and the unit may be dam-
aged.
6 © 2024 Mitsubishi Electric US, Inc.