Mitsubishi Electric M Serie Manuel D'installation page 15

Step. 2 Remove the panel marked "BLOWER".
Step. 3a Remove the screws securing the (3)
panels to the COIL panel shown in the image
above. Remove the "1st" panel and "2nd" panel
marked "COIL".
Specifications are subject to change without notice.
SVZ-KP12, 18, 24, 30, 36NA
Step. 3b Next, remove the smaller panels cov-
ering the drain holes and refrigerant lines by
first sliding in the direction indicated above.
Step. 4 Remove all electrical connections en-
tering the control box. This includes the motor
connector. Pull these harnesses from the con-
trol box. Next, remove the (2) screws indicated
in the image and remove the control box from
the air handler.
15 © 2024 Mitsubishi Electric US, Inc.