Mitsubishi Electric M Serie Manuel D'installation page 17

Plate guide rear
Step. 9 Remove the Plate Guide Rear (3
screws) and Side Drain Pan (4 screws) along
with supporting brackets (4 screws) from the
coil assembly.
DETAIL B
DETAIL B
DETAIL B
Step. 10a Install the (2) drain pan seals inclu-
ded in the accessory bag as shown in Detail B.
These seals will cover the unused holes in the
side drain pan to prevent leaks.
Specifications are subject to change without notice.
SVZ-KP12, 18, 24, 30, 36NA
Side drain pan
Plate guide rear
Step. 10b Reinstall the brackets to the opposite
side of the Side Drain Pan. The Side Drain Pan
1 2
will be reinstalled on the opposite side of the Coil
A
Assembly. Reattach the Plate Guide Rear on the
opposite side of the coil assembly.
B
C
D
E
Completed Step. 10b
F
View Horizontal Left Coil Assembly.
Rubber plugs
G
H
I
Creo : 0_TOP_ASSY_L_21554B2.drw ( )
J
Step. 10c Remove the plugs indicated in the im-
1 2
age above.
17
Piping
3 4 5
The parts are required to meet the latest RoHS directive.
3 4 5
© 2024 Mitsubishi Electric US, Inc.
Side drain pan
6 7 8
RUBBER PLUGS
6 7 8