Mitsubishi Electric M Serie Manuel D'installation page 12

9. Mount positions
9.1. Vertical installations
The air handler must be supported on the bottom
only and set on a solid floor with a return plenum
below or field supplied supporting frame or ple-
num. Securely attach the air handler to the floor
or supporting frame or plenum.
NOTE
FOR DOWNFLOW INSTALLATION, PLEASE
SEE DOWNFLOW KIT MANUALS.
9.1.1. Side return
A single Side return can be used for model codes 12, 18, and 24 only. Dual side returns or additional
plenum below the unit must be used on all other models to ensure proper air flow. If the side return is
used, it is the responsibility of the installer to ensure the ducts are properly sized and sealed to the
cabinet. When cutting a hole into the side of the cabinet, follow the instructions provided below to avoid
damaging any internal structure or wiring.
Specifications are subject to change without notice.
SVZ-KP12, 18, 24, 30, 36NA
12
Plenum
© 2024 Mitsubishi Electric US, Inc.