Mitsubishi Electric M Serie Manuel D'installation page 11

7. Installing the unit
The air handler can be installed in a vertical, hor-
izontal (Right and Left) configuration as shown in
steps 10.1. through 10.3. The units are designed
for "0" zero clearance to combustibles. 24 in.
11 12
(610 mm) is required for service access to the
front of the unit (see Installation Clearance). Re-
gardless of mounting configuration, the air han-
dler must be mounted level to facilitate proper
condensate drainage.
8. Duct connection
Specifications are subject to change without notice.
SVZ-KP12, 18, 24, 30, 36NA
Vertical Installation
13 14
Clearance Area
11
Installation Clearance
TOP View
Horizontal Installation
15 16
Clearance Area
24"
Width of Unit
• See the outline drawing
for the size of the duct
connection.
• Use flanged ducts for
connections to return.
• Do not use sheet met-
al screws longer that
0.75" MAX
0.75" to secure any
ductwork to the air han-
dler.
© 2024 Mitsubishi Electric US, Inc.
TOP View
A
24"
Length of Unit
B
C
D
E
F
G