CAMPAGNOLO SPEED 11 ERGOPOWER EPS CONTROL LEVERS Mode D'emploi page 27

4 . M A I N T E N A N C E
• The Ergopower EPS controls must be checked by a specialised mechanic
every 3 years or at least every 30,000 Km. The brake cables and casings must
be replaced every 2 years or at least every 20,000 Km.
• If used at a professional level, the EPS controls must be checked by a spe-
cialised mechanic and the brake cables and casings must be replaced every
year or at least every 15,000 Km.
• The time indications reported herein are purely indicative and may vary
considerably in relation to the conditions of use and intensity of your
activity (significant factors include for instance: professional training, rain,
mud, salt on streets in winter, the weight of the cyclist, etc). Contact your
mechanic to identify the best-suited schedules for your features.
• Do not immerse your Ergopower EPS controls in water. Never wash your
bicycle with pressurised water. Pressurised water, even from the nozzle of a
garden hose, can pass the seals and enter inside your Campagnolo com-
®
ponents, causing irreparable damage. Wash your bicycle and Campagnolo
®
components by gently cleaning them with water and neutral soap. Dry care-
fully with a soft cloth: Never use abrasive or metallic sponges.
WARNING!
Salty environments (such as roads in winter or in areas near the sea)
may cause galvanic corrosion on most of the bicycle's components.
To prevent damage, malfunction and accidents, carefully rinse, clean,
dry and lubricate all the components subjected to this phenomenon.
ENGLISH 27