CAMPAGNOLO SPEED 11 ERGOPOWER EPS CONTROL LEVERS Mode D'emploi page 19

• Raise the support cover
(A - Fig. 3) to expose the
securing screw (B - Fig. 3).
• Loosen the screw (B - Fig.
3) located on the upper
part of the body, so that
the retaining band (C - Fig.
3) can be slid over the non-
taped handlebar without
removing the band from
the Ergopower
™
trol lever unit.
The ergonomics of the new
Ergopower EPS controls
TM
can be adapted for cyclists
with very large hands by ap-
plying an insert (D - Fig. 4).
• Fit the "big hands" insert
into the rear bottom part of
the control (Fig. 4) before
installing it on the handle-
bar.
ENGLISH
EPS con-
Min. ø 23,8 mm
Min. ø 23,8 mm
Max. ø 24,2 mm
Max. ø 24,2 mm
C
3
D
4
C
A
A
B
B
10 N.m - 7,4 lb.ft
10 Nm (89 in.lbs)
19