CAMPAGNOLO SPEED 11 ERGOPOWER EPS CONTROL LEVERS Mode D'emploi page 20

Make sure the arrow on the
clamp is facing the upper part
of the control (C - Fig. 5).
• If the hood has been remo-
ved completely, slightly dam-
pen the inside of the hood with
some alcohol to make it easier
to install it on the control.
• Place the Ergopower EPS
control in the curved section of
the handlebar and try to create
a straight line where the curved
part of the handlebar allows to
do so (Fig. 6).
20
5
6
C
ENGLISH