Télécharger Imprimer la page

CAMPAGNOLO SPEED 11 ERGOPOWER EPS CONTROL LEVERS Mode D'emploi page 18

Masquer les pouces Voir aussi pour SPEED 11 ERGOPOWER EPS CONTROL LEVERS:

Publicité

1 . P O S I T I O N I N G O N T H E H A N D L E B A R
When installing/removing or ser-
vicing components, switch off the
EPS drivetrain as indicated in the
instruction sheet of the EPS Power
Unit.
• Do not place the upper part of
the control on the straight section
of the handlebar (Fig. 1).
• Make sure that the part of the
handlebar onto which you are
fitting the control has a surface
rough enough to guarantee ma-
ximum adherence.
WARNING!
If the controls are not fitted cor-
rectly they may cause accidents
or physical injury.
• Ensure that the angle ∂ is suffi-
ciently large to guarantee correct
assembly of the sheath and the as-
sociated smoothness of the cable
(Fig. 2).
18
NO!
1
α
2
ENGLISH

Publicité

loading