Tilt Support Lever; Top Cowling Lock Levers; Flushing Device - Yamaha Z250D Manuel D'utilisation

E
EMU00157

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-up
position, lock the tilt support lever to the
clamp bracket.
EMU00163

TOP COWLING LOCK LEVERS

To remove the engine top cowling, pull up
the front and rear lock levers. Then lift off
the cowling. When replacing the cowling,
check to be sure it fits properly in the rubber
seal. Then lock the cowling again by moving
the levers downward.
001571
001572
EMU01701

FLUSHING DEVICE

This device 1 is used to clean the cooling
water passages of the motor using a garden
q
hose and tap water.
NOTE:
Refer to "CLEANING COOLING-WATER
PASSAGES" in Chapter 4 for instructions on
usage.
001573
2-22