Replacing Led Lamp - Whirlpool UVL5430JSS Instructions D'installation Et Guide D'utilisation Et D'entretien

Non-Vented (recirculating) Installation Filters
with normal use.
NOTE: When used in recirculation mode, To Reduce the Risk of
Fire and Shock use only convertion kit Models:
- Charcoal Filter Kit W10272068
- Recirculation Kit W10490330
To replace charcoal filter:
1. Cover the grille that covers the blower motor with the
A B
A.
B. Pins
C. Blower motor
2.
3.
C

Replacing LED Lamp

Turn off the range hood and allow the LED lamp to cool.
To avoid damage or decreasing the life of the new bulb, do
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1. Disconnect power.
2. Push up on the lens and turn it counterclockwise.
3. Remove the bulb and replace it with a 120-volt, 6.5-watt
maximum LED bulb with a GU10 base. Turn it clockwise
to lock it into place.
4. Repeat steps 2-3 for the other bulb if needed.
5. Reconnect power.
13