Publicité
ASSEMBLY
Use a large, clean area to assemble the oven. To protect the finish of the
oven, place it on a large towel or piece of cardboard.
Be careful when handling parts, particularly inside the main body of
the oven, where sharp edges may be present.
Please note: For clarity, some parts may not be shown in all diagrams
throughout this manual.
1.Place the main body on
one side.
Attach the four legs to the
bottom of the main body.
Note the correct
orientation of the legs.
Pass the long screw
through the bottom of
each leg, into the main
body, and tighten until
snug. Do not overtighten.
Upright the oven.
2 . Attach the chimney.
Match the curvature of the
chimney to the top surface of
the main body. Hold the nuts
inside the main body while
tightening the screws from the
outside. Pliers, wrench, socket,
etc. may optionally be used to
hold the nuts.
- 3 -
Publicité
