Push the oven's control knob in and simultaneously turn it
counter-clockwise
to the IGNITION position (indicated on the front panel by a lightning bolt).
You will hear a loud click. This is the spark that will ignite the gas.
If you did not hear the click and/or the burner did not light, turn the knob
back to OFF and repeat the process above. If the burner still does not light,
close the tank valve, turn the control knob to OFF, wait five minutes for the
gas to clear, and try again.
The control knob will not turn from the OFF position without being pushed
in. Never light the oven with the door in place.
Never operate the oven without the bottom grid.
After several unsuccessful attempts to light the oven, allow residual gas to
clear for at least five minutes before trying again.
MANUALLY LIGHTING THE OVEN
Remove the door and any items from inside the oven. Remove the top grid
and stone, if not using them, but always leave the bottom grid in place.
Wait for any residual gas from previous attempts to completely clear.
Close the chimney. Open the valve on the tank.
- 10 -